[. . . ] Please remove the plug from the socket outlet before cleaning or maintaining the appliance. Donotimmerseinwaterforcleaning The hose shall be checked regularly and must not be used if damaged. Using the vacuum cleaner in the above circumstances may cause serious damage to its motor. [. . . ] Using the vacuum cleaner in the above circumstances may cause serious damage to its motor. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. Please remove the plug from the socket outlet before cleaning or maintaining the appliance. Mains cable Cable rewind button Power outlet for the use of power driven tools* Mechanical Classic Long Performance s-bag® full indicator* Electronic Classic Long Performance s-bag® full indicator* and filter full indicator* Hose connection Cover release catch for Classic Long Performance s-bag® compartment Accessory compartment On/off button Parking position for tube and nozzle when in use Storage slot for tube and nozzle when not in use Power booster suction control regulator Blowing outlet* Some models, push locking catch to dismantle). Extend the cable and connect to mains, ensuring the cable is not twisted before use. Textiles on furnitures/carpeted stairs in horizontal mode: use the Textile Turbo nozzle with nozzle front down (35). Textiles on furnitures/carpeted stairs in vertical mode: use the Textile Turbo nozzle with nozzle front up (36). S-bag® indicator and changing the s-bag®: For peak performance the Classic Long Performance s-bag® should be changed when full. The blowing outlet can be used for drying damp shoes or clearing leaves etc: 49. Insert the hose into the blowing outlet until the catches click to engage. It has two modes, horizontal and vertical, by adjusting the nozzle front cover. Precautions: Only use the nozzle on carpets with a pile depth of under 15 mm. To avoid damaging your carpet, do not keep nozzle stationary whilst brush is rotating. Do not pass nozzle over mains cable and switch off nozzle immediately after use. Disconnect from mains and remove entangled threads from brush by snipping with scissors. To avoidblockagesandmaintainsuctionefficiency, thefloornozzles should be cleaned regularly using the hose handle. [. . . ] Disconnect from mains and remove entangled threads from brush by snipping with scissors. To avoidblockagesandmaintainsuctionefficiency, thefloornozzles should be cleaned regularly using the hose handle. Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. [. . . ]